Categories
Idaho

Celebration Park and Swan Falls Dam- Ride Report

Photo from the BLM website

Day One Tuesday, April 17
Boise to Celebration Park – Total distance; 43 miles

I stare at the 22 oz. Rogue Dead Guy Ale for about five minutes before deciding not to buy it because I don’t want to carry it the rest of the way to Celebration Park, and surely there will be be at least a convenience store in Melba where I can get a decent beer to drink as I set up camp. There is indeed a market in Melba but it looks pretty homemade and, no you can’t buy singles but there are tallboy cans so I buy one of the least offensive…24 ounces of PBR. I often wonder why out of the way places don’t stock flavorful beer, since the distributors are the same ones that deliver the Bud Lite. And, is it just me or do real men not drink micro-brews? Bike touring forces one to face the weighty, existential questions.

Boulder field
Boulders deposited by the Bonneville Flood

When the Bonneville Flood slammed through here a few years back, it tore chunks of volcanic rock the size of school buses off the walls of the Snake River Canyon. Bouncing along under water the chunks were rounded and smoothed and then deposited downstream…a jumble of huge boulders in the narrowest part of the canyon and a more even distribution of smaller boulders where the canyon widens out and the water slowed down.

I scout out what appears to be the best place to hang the hammock and get after it because the clouds are turning blacker and more menacing and I can see lightning to the north. I am ecstatic that the parking lot is empty and I will have the whole place to myself. Then a car comes fishtailing down the gravel road from the “east campground” and out the entrance road and after the dust settles I hear sounds of a beer blast coming from the same direction. Oh well, that’s what they make I-pods for.

Various Boy Scouts have made Eagle projects out of building structures at Celebration Park and so there is a network of boardwalks and decks and even an atlatl range. There are bathrooms and a visitor center and the place starts humming in the morning with park staff getting ready for the busloads of fifth and sixth graders coming that day. That entertains me for a while but, with peace and quite my main objectives for the trip, I decide to push off (quite literally as will soon become apparent)

The rain is coming, but I think we are ready.

Day Two Wednesday, April 18
Celebration Park to Swan Falls Dam – Total Distance; 16 miles
Google Maps shows what looks like a road along the Snake River between Celebration Park and Swan Falls Dam. After maybe a mile or maybe two, motor vehicles are restricted and the road becomes double track and then single track and in places almost non-existent. I spend some time pushing the bike through loose sand encouraged by Wendell’s report after riding here last week that the loose sandy section is not too extensive. But with a loaded bike weighing probably close to 70 pounds and relatively skinny 700cx32 tires I end up pushing quite a bit. But there is no rush and the scenery is on par with that of southern Utah, so I push along and ride when the ground is firm enough.
Other sections of the path are interspersed with melon sized rocks which means I ride (scoot) with one foot clipped in and the other pushing. Even further on, where the trail occupies a narrow shelf between the river and the canyon walls, and is hemmed in by willow bushes, tumbleweeds have collected in the path. They are impossible to miss and every time I ride over one it attaches to fenders/chainrings/derailer/chain/wheels….so I am stopping every twenty or thirty feet to pull them out.
Motor vehicles are restricted over about eight of the twelve miles between Celebration Park and Swan Falls Dam. The last four miles to the dam are on gravel road. Swan Falls Dam is owned by Idaho Power and there is a day use area with boat ramps and picnic tables and bathrooms, but no camping. There is too much activity and noise around here anyway so I cook some lunch, refill the water bottles and head back down the gravel road and about half a mile down the car-less path and find a spot to pitch shelter just before the rain comes again.



Day Three, Thursday, April 19
Total Distance; 47 miles

I am in the heart of Morley Nelson Snake River Birds Of Prey National Conservation Area. Laying under my improvised shelter this morning, waiting for the rain to stop, I can hear many species. Crows (mostly), mourning doves, geese, ducks and loons? Sometimes I am sure I hear people but it is just the birds laughing at the old guy hiding under a tarp. Climbing up the switchbacks out of the canyon this morning I stop to watch a golden eagle floating overhead and he is soon joined by three others. The steepness of the terrain means that they are very close when they pass over and I watch them for several minutes. The whole time I spend watching, none of them flap their wings. Must be nice. Last night I startled a pair of pheasants before they startled me with their drum beat winged escape. I didn’t encounter any vampires but I did observe a couple of George Romero-esque zombies disguised as sight-seeing tourists.

The eight miles of trail along the river was definitely the highlight of the trip and made the jaunt more than worthwhile. When I do it again I will have a bike with fatter tires. A fat bike like the Surly Pugsley would be perfect and I think the whole trail would be rideable even with a loaded bike. 700×40 or 26″x2″ tires would be the minimum cross sections for tires through here I would think. Any bike capable of the whole trip without driving would necessarily be a compromise; one that can handle the off road sections while still being able to cruise on the pavement.

Categories
Touring Bicycles Tours and Rides

The Pilgrim And The Ogre

God’s first language is Silence. Everything else is a translation.
–Thomas Keating

The Bike Hermit’s alter-ego has been alive to witness April 17 fifty eight times as of today. In recognition a ceremonial excursion into the high desert has been planned. He will be taking Chief on a ride to Celebration Park south of Kuna tonight and then on to Swan Falls Dam on the Snake River before returning on Thursday. The chance of rain tonight and tomorrow is ever increasing and so the plan will have contingencies. There are less than 20 miles to cover between the two stopovers and so it should be workable even with the rain, although the preferred route along the Snake River to Swan Falls may not be passable if it rains too much, in which case an alternate route is available (at least I’m pretty sure there has to be a pub nearby).

loaded touring bike
Chief is chompin' at the bit.

Earlier, Travis came in to pick up his new Bob Yak trailer. His Surly Ogre frame is spaced for 135mm hubs, the ‘dropouts’ are just like Troll’s…rear load horizontals with a derailleur hanger, slotted disc brake mounts, M10 x 1mm threaded holes for mounting Surly Bill & Ted trailer-connecting hardware (or B.O.B. Nutz), and a dedicated anchoring point for a Rohloff OEM2 axle plate.

The right rear dropout on the Surly Ogre with a cut off section of solid steel axle inserted into the threaded trailer attachment hole

The Bob Nutz attached to the threaded axle bit.

Here is the Bob trailer attached to the Bob Nutz

The threaded holes in the dropouts will also accept the proprietary anchors for Surly’s own trailers, the Ted and the Bill. Like everything Surly these details are well thought out and very functional, which seems as though it should be easy to do but Surly is the only company that consistently gets it right i.m.h.o.

Categories
Front Racks Handlebar Bag Touring Bike Accessories

Gille Berthoud Decaleur Brackets, Custom Replacements

Gilles Berthoud makes bicycle products with apparent disregard for costs. The materials and methods and designs are always uncompromising. That is why it is surprising to me that the Gilles Berthoud decaleurs (a bracket made to attach to the bicycle stem and secure a front bag) don’t really work with the Gilles Berthoud rando bags.
Gille Berthoud H-121 decaleur
The large bolt replaces the stem bolt and threads into the hole in the short piece of tubing which replaces the stem nut. The arms are bolted on to the short piece of tubing which is threaded at both ends. Then the arms can be rotated to the desired position to line up with the pieces attached to the leather trim piece along the top of the bag so all the pieces can be skewered together. The only problem is, the shape and the length of the arms allow for only a very narrow range of positions; if the arms are parallel to the ground, the bag is pushed too far forward….if the arms are rotated down so the bag can sit closer to the bars the connection point is low, potentially below the point where the pieces need to be attached to the bag. Another problem is that the arms of the decaleur interfere with closing the top flap.

The GB Decaleur arms keep the flap from completely closing, resulting in a permanent curl in the top flap.
This is the shorter version of the decaleur. For a bag topping out at close to handlebar height it pushes the bag too far away from the bar.
For a bag topping out below the handlebars this decaleur, the GB H-91, works fine. The back side of the bag is still close to the handlebar.

I know someone with access to a machine shop who likes to tinker with bike parts so we imagined a part that would work to replace the stock arms. He did a rough sketch and gave it to his c.a.d. guy who put it into language a machine could understand and out came these:

One of these pieces will bolt to either side of the short piece of tubing bolted to the stem and replace the bent arms of the original decaleur. The holes allow for adjustability plus they make it look rad. The U-shape will bring the outer arm up in under the top flap of the bag without interference.


Here’s a comparison of the original bracket arms bolted side by side with the new ones
:

New U-shaped brackets provide more adjustability and clearance for the bag lid.

Here are the new brackets in use with a GB25 bag on Sky King’s Bleriot:

And here are the new brackets on Chief with a GB28 bag:

The original arms are a little bit wider than the new brackets at the bag attachment point, so some spacers take up the slack. Here, we see the upgraded leather spacers in use.

 

Here are the two bags with the new brackets. The bags top out at roughly handlebar height and they sit close to the bar, minimizing any adverse influence on the steering.

 

Notice how neatly the brackets tuck under the top cover flap of the bag.
Categories
Idaho

Taking it slow in the Hagerman Valley

As the Bike Hermit is deep into his remodeling project, Sky King jumped at the chance to do some great slow pedaling with the ladies.  This turned out to be a perfect way to enjoy spring weather, work in bird watching and be reminded that life is about the journey, not the destination.

Pelicans In Flight

Lisa, Julie and I spent hours exploring the Snake river along State Highway 30 just south of Hagerman, Idaho and then more hours at Bruneau Sand Dunes. Our only goals were to have fun and enjoy the abundance of waterfowl. Spinning along we never passed up the opportunity to stop, grab the binoculars and take in the views. We took advantage of soaking in the pool at Miracle Hot Springs – even admired the alligator.

Waking up to the sound of Thousand Spring’s waterfalls made for a delightful start to our ride.

Thousand Springs
Fashionably dressed bird watchers

Being open to meandering lead to sweet surprises. One of my favorites was observing the Heron’s working on the nests in the rookery. There were at least two dozen birds nesting in a compact group of trees. Would be fun to come back and watch “hatchling” flying lessons.

Heron Rookery

Riding anywhere in Southern Idaho in early spring, means laughing at the yellow bellied marmots and their insatiable curiosity.

soaking up some sun
checking us out

 

 

 

 

 

 

 

 

Finally no birdwatching trip would be complete without the harrier hawk in the sky, a few ducks in the pond and the beautiful wax wings.

Marsh Hawk at Bruneau Sand Dunes
Hold still so we can take a picture